Tyler Technologies is the premier provider of safe helicopter frameworks, each one is designed for a large variety of tactical situations, and prepared for the perilous conditions that tactical teams work in. Tyler prides themselves on their effective helicopter platforms, which are centered around the safety of tactical personnel.
 
TSOP MD-500 Power Bench
The TSOP Power Bench is a helicopter bench produced specifically for the MD-500 helicopter series. It is manufactured with safety as one of its main priorities, presenting a special operations platform designed to provide a reliable work area outside of the helicopter, allowing for live inspection and maintenance. The Power Bench is outfitted with some anchor points for the attachment of seat belts, and tie-in rings that are used to secure safety harnesses to the bench.

AS-350/355 Special Operations Platform
Tyler Technologies has worked in collaboration with quite a few different law enforcement agencies to design and build effective helicopter platforms compatible with the AS-350 and AS-355 helicopters. They are manufactured in the U.S. and provide both greater safety and efficiency in any number of hazardous tactical situations and rescue missions.

MD-500 Helicopter Bench
This Tyler special operations platform is designed specifically for the MD-500 series of helicopters. It is intended to mount to the aft cabin area of the helicopter, and the fuselage jack points using special brackets and clamps. This helicopter bench is quite easy to install, requiring no additional modifications to the airframe, nor the use of any tools. It features attachment points which are used to secure any personnel equipped with rappelling harnesses, adding a bit of extra security during tactical operations.

Tyler Technologies Fast Rope Hook
The innovative Tyler Technologies Fast Rope Hook was designed for increased safety and security during a variety of both tactical and rescue operations. A number of safety mechanisms were installed within the hook to prevent harm from coming to personnel during operations. The hook feature secures the rope into place once a load is applied. This mechanism exists to prevent accidental release while a team is conducting roping operations. The hook comes equipped with a fail-safe function in the case of an aircraft emergency, wherein the team is lowered safely to the ground before the fast ropes are jettisoned. It is designed for use with Tyler's safe helicopter frameworks and the other fast rope equipment they provide.
​
Tyler BH-407 Helicopter Platform
The Tyler BH-407 safe helicopter frameworks are designed for the Bell 407 series of helicopters. Like most of Tyler's other effective helicopter platforms, they are manufactured for use in hazardous tactical situations and fast-rope operations. They provide added safety to the personnel placed on the bench, who can be secured with safety harnesses and self-retracting twist-release seat belts.

Tyler Technologies is one of the premier providers of helicopter frameworks and equipment designed to enhance safety and performance within law enforcement and military organizations throughout the world. They've constructed the Tyler Special Operations Platform (TSOP) to help improve mission safety and efficiency in tactical operations. It features a lightweight and aerodynamic design, quick installation with no use of tools, doesn't require any modifications to the aircraft, and can be stowed in a vertical lockdown position when not in use. The special operations platform is designed with a number of functions, useful in many situations, such as transportation, ground personnel deployment, troop retrieval, rooftop evacuations, and search and rescue operations. Additionally, the helicopter frameworks and special operations platforms provided by Tyler Technologies include anchor points which can be outfitted to accept a helicopter fast rope hook or rappel operations.
The Tyler Universal Fast Rope Release Hook is a universal helicopter fast rope hook designed for mounting on existing hoist receiver tubes or repelling arms located at the large helicopter side doors or rear ramps. The standard Tyler Fast Rope Hook designed for the Eurocopter AS350/355 or the MD-500 series helicopters, where the pilot or co-pilot would have to operate the hook with a cable and a handle lever. The Tyler Universal Fast Rope Hook is designed for operation on large helicopters, and by a crewman at the rear ramp or door. The Fast Rope Release Hook is operated with a pull handle located at the rear of the Fast Rope Hook, and there is a two-position safety latch for both normal operations and a lockout pin for training exercises. The hook is specifically designed for fast-rope operations, and can be configured to either "release under load" or "lock under load" providing agencies and organizations with a choice depending on their safety priorities.
The Tyler Fast Rope Unit is a tactical helicopter fast rope unit designed for standalone use, or with Tyler helicopter frameworks and allows for personnel deployment in situations where the helicopter cannot safely land. There are units designed for both the Eurocopter AS-350/355 and the MD-500 helicopter series. The unit provides an overhead hook assembly which allows a quick and easy transition from the helicopter to either fast-rope or rappel. The hook is produced with a cable release that can eject the ropes once personnel reach the ground. This helps to provide a safe departure for the helicopter without the ropes attached. Tyler Technologies has worked in conjunction with a leading rope manufacturer to develop a new fast-rope specifically designed for tactical helicopter operations. This new rope is made to be nearly twice as light while still maintaining ample durability. The installation process for these units is designed to be quick and easy, with no tools required, which is ideal for emergency response.

The Tyler Special Operations Platform (TSOP) is a pair of externally mounted platforms or helicopter benches used by government, law enforcement agencies & military organization worldwide. The helicopter platform is designed primarily for external transport and deployment of tactical teams. The helicopter framework is extremely versatile, with a wide range of uses.
The TSOP is able to provide assault teams with a safe and stable external platform. As well as giving them a tactical advantage in high-stress situations. It can also be used as a sniper platform, and it can be equipped with a Fast Rope/Rappel attachment for quick insertion of a tactical team. Additionally, it can be used in search and rescue operations or as an external cargo mount.
The Special Operations Platform is quick to install and requires no tools or modification to the aircraft. It has a lightweight, aerodynamic design and is built to ensure improved mission safety. The Tyler Special Operations Platform is available in multiple platform models designed to be compatible with different aircraft.
The Tyler Special Operations Platform for the AS-350 helicopter bench is attached to the aircraft landing gear by two clamps per gear. With as little as two people this platform can be installed in five minutes. The bench itself consists of a set of tubular frame members composed of steel and four aluminum-mounting brackets per bench. A set of pins provides further security to the mount clamp bolts. When not in use, the helicopter platform can be stowed in a vertical position. This model has a maximum weight per bench of 500 pounds and is primarily compatible with the Eurocopter model AS-350 B aircraft, but can also be used with a number of similar models.
The TSOP MD-500 helicopter platform, which is attached to the lip of the aircraft's aft flooring and is positioned by an attachment at the jack points, is built to be installed by two people in fewer than five minutes. The helicopter bench itself consists of multiple tubular frame members composed of steel and is built to be compatible with the model MD-500D helicopter, as well as multiple similar models. The maximum weight per bench for this model is 500 pounds.
The TSOP for the BH-407 model of helicopter bench is attached to the aircraft landing gear by a total of four clamps, two clamps per gear. The platforms are designed for installation by two people in fewer than five minutes as well. The helicopter bench itself consists of four aluminum-mounting brackets per platform and a set of tubular frame members composed of aluminum. A set of PIP pins is used in order to provide further security for the mount clamp bolts. This platform model was built to be compatible with the Bell model B 407 helicopter, as well as the Bell model 206 L1 and a number of similar models. It has a maximum payload of 600 pounds per platform with no more than 300 pounds over a single attachment point.